Continuous Move , Dedicated Loads.

[skunniyur]

Hi;
Does anyone have documents on configuring continuous moves / dedicated loads?

[krishna.kk]

Re: Continuous Move , Dedicated Loads.

HI,

Please let us know if have you have got any documents on configuring continuous moves / dedicated loads

[joecallan]

Re: Continuous Move , Dedicated Loads.

If you look at the Day 1 Presentation from the OTM SIG Conference, you will see a presentation from Chris Starks which talks about Continuous Move setup. Follow this link:

http://www.otmfaq.com/forums/f31/otm-sig-user-conference-2007-presentations-417/

[rj5316]

Re: Continuous Move , Dedicated Loads.

Hi, we have followed the ppt .. but still get an error saying "cont move: not allowed on the shipment xxxxxx". This is the second shipment selected. we have set the plan para according to the ppt

pls advice...

rgds--

[joecallan]

Re: Continuous Move , Dedicated Loads.

See the attachment for configuration screenshots.

Scenario:

Order Release 1: K12 to K23
Order Release 2: K45 to K67

[rj5316]

Re: Continuous Move , Dedicated Loads.

Hi Joe,

Thanks we were able to create the continuous move based on your inputs.

We are only able to manually find & link the shipments created using the appropraite planning parameter sets, however, we are unable to create such a continuos move automatically.

Alos we have noted the agent called "FINdAND CREATE CONTINUOUS MOVE", wonder if this is useful and if so how......

thanks again for u=your help....

Ravi & Kishore

[krishna.kk]

Re: Continuous Move , Dedicated Loads.

hi skunniyur,

Joe had attached a document under the same theard dated 9 feb .

Thas working fine .

Rgds
kishore

[singapore.otm]

Re: Continuous Move , Dedicated Loads.

Hello Ravi/Kishore,

Could you plan Continuous Move using Bulk Plan?

Even I'm facing same issue, I could plan CM using Operation Planning -> Plan Continuous Move ->Link Shipments.

Please help.

Best Regards,

Hi Joe,

Thanks we were able to create the continuous move based on your inputs.

We are only able to manually find & link the shipments created using the appropraite planning parameter sets, however, we are unable to create such a continuos move automatically.

Alos we have noted the agent called "FINdAND CREATE CONTINUOUS MOVE", wonder if this is useful and if so how......

thanks again for u=your help....

Ravi & Kishore

[NickTizzy]

Re: Continuous Move , Dedicated Loads.

Joe, do you know if you can have multiple rate offerings but same carrier for CM? So I have a rate offering for carrier a inbound and carrier a outbound. Example is inbound is A---B and then outbound load is C----D. B and C are practically same location they are so close.

[er.prashant.jain]

Re: Continuous Move , Dedicated Loads.

Joe, do you know if you can have multiple rate offerings but same carrier for CM? So I have a rate offering for carrier a inbound and carrier a outbound. Example is inbound is A---B and then outbound load is C----D. B and C are practically same location they are so close.

The basic requirement for continuous move is all shipments linked together in a continuous move must use the same service provider but different rate offering/rate record from the same service provider can cover the whole move.